Matched machine route
A recommended servo-hydraulic configuration based on the part, resin, mold and production target.
Servo-hydraulic series · Project-configured new machinesGlobal inquiry Jim@geerpower.com
SERVO-HYDRAULIC SERIES · NEW MACHINE
GEERPOWER Servo-Hydraulic Injection Molding Machines
The GEERPOWER servo-hydraulic series is the practical new-machine route for buyers who need application matching, controlled project cost and a clearly defined production-cell scope.
WHAT THE FIRST REVIEW DELIVERSReceive an application-matched machine route, a visible list of open technical points and a defined commercial scope before final quotation.
Send available project data now. Missing decision inputs will be identified before final quotation.
Open-point register
A clear list of missing mold, utility, automation or acceptance inputs that could change selection.
Scope boundary
What is included, optional or excluded across the machine, auxiliaries, trial, packing and delivery.
PROJECT FIT
When this series deserves a closer review.
- General-purpose and industrial molding projects
- New production cells with controlled capital cost
- Capacity expansion where factory utilities and existing molds must be matched
- Projects that require machine, robot, auxiliaries and export delivery in one scope
CONFIGURATION CHECKS
What Geerpower confirms before quotation.
- 01
Part, resin, shot requirement and quality target
- 02
Mold dimensions, weight, cavity, cooling and interfaces
- 03
Target cycle, output and operating pattern
- 04
Voltage, utilities, automation and auxiliary requirements
- 05
Trial evidence, packing, documentation and handover boundary
CHOOSE THE RIGHT PROJECT ROUTE
Do not compare machines before the decision basis is clear.
Use the application and delivery boundary to decide whether this series, the alternative drive route or a complete turnkey cell should be reviewed first.
Compare hydraulic vs all-electric →Review the turnkey project route →Choose this route when
The project needs a practical new machine, controlled capital scope and application-led configuration.
Compare all-electric when
Drive architecture, process repeatability, production environment or energy strategy is a leading decision factor.
Choose turnkey when
The machine must be coordinated with robot, material handling, cooling, utilities, trial and handover.
PROJECT SPECIFICATION TABLE
The technical inputs behind a useful machine quotation.
Fixed model claims are not substituted for application data. This HTML table shows what the buyer provides and what Geerpower confirms before the final specification and commercial scope are issued.
| Decision input | Buyer data to provide | What the project review confirms |
|---|---|---|
| Product & resin | Part drawing or photo, material grade, part and runner weight | Shot requirement, process route and quality questions to confirm |
| Mold | Outside dimensions, thickness, weight, cavities, movements and cooling | Physical fit, platen and interface checks, mold functions and utility needs |
| Production target | Target cycle, pieces per hour, shifts and expected operating pattern | Capacity route, automation needs and project acceptance basis |
| Factory & cell | Voltage, frequency, cooling, air, robot and auxiliary requirements | Machine options, utilities and included-versus-buyer-supplied boundary |
| Delivery & acceptance | Destination, packing, document, trial and handover expectations | Commercial scope, evidence plan and open points before final quotation |
EVIDENCE BEFORE CLAIMS
Four inputs make the first recommendation more useful.
- Product drawing or clear part photo
- Resin and part-plus-runner weight
- Mold dimensions, cavity and interface data
- Output target, voltage and destination
Exact specifications, energy use, cycle results, price and delivery remain subject to the confirmed project configuration and supporting evidence.
Send project evidenceONE GEERPOWER QUALITY DISCIPLINE
Hydraulic and all-electric projects follow the same documented control logic.
Component selection, assembly checks, inspection records, open-point tracking and project-specific acceptance are managed under a common discipline informed by all-electric production requirements. Final performance claims remain specific to the selected architecture, configuration and test conditions.
Read the two-series quality approach →Review delivery and support boundaries →BUYER QUESTIONS
Answers before final machine selection.
How is a GEERPOWER hydraulic injection molding machine selected?
Selection starts with the part, resin, shot requirement, mold dimensions, target cycle, output, utilities and destination. Final specifications are confirmed only after these inputs are reviewed.
Can a servo-hydraulic machine be supplied as a turnkey cell?
Yes. The project scope can include the machine, mold-interface review, robot, dryer, loader, chiller, conveyor, utilities, trial plan, packing and delivery coordination as required.
Does this page publish fixed performance or energy claims?
No. Performance, energy use and cycle results depend on the final configuration and application. Project-specific values must be supported by the confirmed specification and test conditions.
REQUEST A SERVO-HYDRAULIC SERIES REVIEW
Start with the product, mold and output target.
Attach what is available. Geerpower will identify the missing inputs before confirming the series, configuration, commercial scope or delivery plan.